[Matt_21]

Rilasciata la nuova versione: 4.37

DOWNLOAD

Ciao  <_<

[Vincent Vega]

E' sempre necessario ricordarsi il ChangeLog; imparate subito prima che sia troppo tardi :whistilng:.

Prima di quest'ultima Release era stato rilasciato SpeedFan v4.36

- Greatly improved temperature reporting for almost all nVidia video cards   
- Now fan speeds are lowered more aggressively
- Added support for AMD K11 temperature sensor
- Added full support for SMSC EMC6W201
- Added full support for SMSC SCH5127
- Added support for SMSC EMC2710P fan speed readings
- ARECA RAID support updated to Build 270
- Added AMCC/3ware test code
- Improved IT8720F identification
- Fixed F1 context sensitive help key support
- Better identification of DIRECT RAMBUS modules   
- Enabled Intel ICH8 SMBus, if needed
- Identified SMSC SCH5317   
- Some addresses on the Asus P5N32-E SLI are no longer scanned
- Some addresses on the Asus Rampage Formula are no longer scanned   
- Some addresses on EVGA NFORCE 680i LT SLI are no longer scanned

http://www.almico.com/sfhistory.php

Il ChangeLog di SpeedFan v4.37:

- Fixed a bug where, after resuming from suspend, fan speeds were not really changed
- Added full support for AMD CD5536 SMBus   
- Added identification of Fintek F75111R   
- Fixed an Exotics tab Access Violation   
- Fixed a bug that caused all of the EVENTS to be lost after entering CONFIGURE

http://www.almico.com/sfhistory.php

E' un po' che non utilizzo questo Sw, dovrei reinstallarlo per vedere i cambiamenti. Grazie per la segnalazione <_<.

[Matt_21]

Appena premuto "Invia messaggio" mi sono ricordato il ChangeLog. Sono andato a prenderlo ma ho notato che mi manca il tasto "Modifica" in questa sezione!!! Perchè??  :confused:
Aspettavo l'arrivo di un Moderatore di Sezione per chiedere spiegazioni.

[Ogliastrino]

ho notato che mi manca il tasto "Modifica" in questa sezione!!! Perchè?? 

Devi superare i 100 post per poter modificare i tuoi messaggi > http://www.emuleitalia.eu/index.php/topic,22514.0.html

Ciao 

[Matt_21]

Ma io ho già modificato miei messaggi in altre sezioni. Qui è diverso? Perchè ho letto il regolamento di sezione e non dice niente.

Scusate l'OT.

[Matt_21]

SpeedFan 4.38

Spoiler

-added full support for AMCC/3ware SMART readings
-added full support for Intel QST
-added full support for ADT7470
-added full support for ADT7462
-added full support for nVidia MCP79 SMBus
-added full support for SiS968 SMBus
-added full support for Intel i7 internal core temperature reading
-improved ITE IT8720F identification
-added Fintek F71858 temperature readings
-PC87360, PC87362, PC87363, PC87364, PC87366 do hide unavailable readings now
-ProbeGL5xxSM now checks some more registers to try to avoid false detections
-improved CPU identification routines
-improved FB-DIMM support on some Intel chipsets
-the exotics tab now shows the fitness of the hard disks connected to ARECA RAID controllers too
-ARECA and AMCC/3WARE connected hard disks are now searched before the standard channels, trying to avoid aliased, merged or fake reported SMART data
-added identification of Fintek F75125R
-removed two debug messages related to UGURU3
-added some debug code to try to support VIA CX700/VX700 SMBus
-DELL SUPPORT is now checked on ATI SBx00, Intel 631xESB, ICH8, ICH9 and ICH10 too
-disabled DELL support on 64 bit systems
-added /NODELLSCAN command line parameter
-fixed daylight saving time handling in event emails
-added full support for Windows 7 32 and 64 bit
-fixed a minor bug that caused the main window to be minimized when clicked
-CONFIGURATION / SPEEDS SpinBoxes now allow manual edit
-added some scan exceptions for Asus M2N-E and for Dell 0G841G
-INSTALLER: improved OS identification
-INSTALLER: fixed the ADMIN identification issue

http://www.almico.com/sfhistory.php ;  :ok:



@ Mod. di sezione:
Che ne dite di togliere la versione del programma dall'oggetto del thread, come da Regolamento?  :whistilng:

[Vincent Vega]

Mitico, l'ho aspettato per troppo tempo. Finalmente supporta le GTX 295 .

[Lucarella]

SpeedFan aggiornato alla versione 4.39

Changelog

Spoiler

- added full support for Fintek F71889F, even at unusual addresses
- added support for a new method to access SMART data
- added support for SCSI and SAT hard disk SMART access
- added full support for SuperMicro PWS-865-PQ PSU
- added full support for Winbond W83795G
- added full support for SMSC EMC1402
- added SHORT and EXTENDED OFF-LINE SMART TEST in SMART tab. This feature works on a number of supported interfaces and not on all of them
- added voltage readings for Winbond W83793G
- properly read Tjmax on Core i7 based Xeons
- relabeled IT8512F to IT8512E
- the tray hint is no longer updated if ShowStaticIcon is true
- the tray icon tooltip layout is now vertical
- added Fintek F72569DG detection

Download Page

:bye:

[Vincent Vega]

L'aspettavo, grazie per la segnalazione .

[Walter]

Aggiornato il primo post.

[Lucarella]

Speedfan aggiornato alla versione 4.40

Changelog

- improved identification of Winbond W83667HG
- W83667HG has its own support code now
- W83667HG PWM MODE settings now work properly and can be used to change fan speeds
- fixed a minor bug in temperature readings of EMCT03
- fully included data from TPWS002 Intel Document about Tjmax values
- added support for ADP3228 fan reading
- AdvSmart no longer links a drive if SMART data has bad checksums

Download Page

<_<

[Lucarella]

Speedfan aggiornato alla versione 4.42

Changelog

- greatly improved nVidia video card support
- added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
- improved Intel QST support
- Intel QST now checks first for 2.0, then falls back to 1.0, if needed
- added support for external USB drives using JMicron controllers
- fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
- MUTEXes used to synchronize with other tools while accessing buses are now defined Global
- fixed CPU usage bars size on the main window
- enabled SMBus access on ICH10 and ICH10R, if needed
- if SpeedFan service is unavailable, a message dialog is shown and the program stops running
- added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
- SEND REPORT now includes a list of ACPI devices found

Download Page